07 3823 4405
info@wrightstone.com.au
Forms a superior protective surface layer that is breathable, dense and abrasion resistant.
Wright Stone Trading / Lesa Systems Australasia is the authorised distributor of Metzger Mcguire world-leading range of industrial floor joint fillers and repair products. Metzger McGuire has led the way in the development of concrete floor protection systems for more than 45 years. Metzger Mcguire floor joint fillers and concrete repair products are specifically engineered to provide optimum protection in a range of concrete floor setting from heavy duty warehouse / distribution centre facilities to the stained and polished concrete floors widely used in retail stores and schools.
SPAL-PRO RS88
Spal-Pro RS88 is a rapid setting polyurea polymer liquid of 100% solids content. When cured it is a semi-rigid, rubber-like solid with a Shore Hardness of A88-92. It was developed to fill and protect joints in trafficked industrial and retail concrete floors. Its primary function is to support such traffic and protect joint edges. It is also ideal for filling random cracks in industrial floors. It contains no VOCs. It comes in a range of colour-fast colours (UV stable).
Product supplied in 600ml dual cartridges or bulk. Pumps available for hire or purchase for the bulk product.
SPAL-PRO 2000
Spal-Pro 2000 is a rapid setting two-component polyurea, which cures to a charcoal grey solid with a hard rubber-like hardness of A-95. It is ideal for repair of spalled joints, filling random cracks and patching gouges, holes and surface defects. It is used to fill and protect joints in industrial concrete floors that are subject to hard wheels and heavy loads. Its primary function is to support such traffic without deflecting. It is however not UV resistant, and UV rays may cause discolouration. Can be used in ambient or freezer applications as low as -35˚C.
RAPID REFLOOR
Rapid Refloor is a two-component polyurethane/polyurea hybrid. When cured, it results in a rigid structural polymer with a Shore D Hardness of 70-75. It was developed to repair random cracks and surface spalls/pop-outs and other surface defects in industrial concrete floors that are subject to wheeled traffic. It should not be used as a joint filler. It should not be used below 0˚C. The floor is ready for trafficking in 15-30 minutes. It is virtually odourless.
ARMOUR HARD XTREME
Armour Hard Xtreme is a two-component epoxy system developed for the repair of industrial concrete floors subject to hard wheeled vehicle traffic. As a mortar, it can be used for large spall repairs/rebuilding of joint shoulders, as a topping for delaminated slabs, or for filling potholes, gouges, ruts and pop-outs. It can be used down to -7˚C. It is quick setting – foot traffic in one hour, normal traffic in two hours. It has superior wear and impact resistance. It is low odour.
Convergent superior lithium technology provides unmatched performance im protecting substrates against wear, dusting, sweating, efflorescence, scaling, surface ASR and damaging alkalis.
PENTRA-SIL NL HD+C
CONCRETE HARDENER, SEALER, DENSIFIER AND CURING AID
HD+C (hardening/densifying/curing) combines advanced nano lithium
silicate hardening with an engineered non-ionic emulsion for curing. It meets and exceeds modified ASTM C156. It provides single no-rinse application, good hardening and densification, and a good curing membrane. It is an environmentally safe, waterborne system. It protects and cures the concrete slab during construction.
Available in 20L, 200L, 1000L
PENTRA-SIL NL (NANO LITHIUM)
CONCRETE HARDENER, SEALER AND DENSIFIER
Pentra-Sil NL treatment forms an extremely hard, dense protective surface layer that is breathable, dense and abrasion resistant. The hardener, sealer, densifier creates a stronger, more impenetrable, and better-looking finish (satin – glossy) that is dust-proof and resistant to staining and deterioration.
Available in 5L, 20L, 200L, 1000L.
PENTRA-SIL 244+
SALT PROTECTION, DUST-PROOFER, HARDENER, SEALER
AND DENSIFIER
Pentra-Sil 244+ hardens, seals and densifies concrete and masonry
surfaces creating the ability to maintain a salt ion screen and water-repellent characteristics even through regular maintenance, pressure washing, pedestrian and traffic wear. Substrates become resistant to staining, spalling, weathering, efflorescence, water intrusion, fungi and mildew, deterioration, freeze-thaw scaling and reinforcing steel corrosion.
Available in 5L, 20L, 200L, 1000L
PENTRA-GUARD HP
HIGH PERFORMANCE INDUSTRIAL FLOORING SURFACE HARDENER AND PROTECTIVE CLEAR COAT
Pentra-Guard HP is the optimum coating system designed for harsh and high abuse conditions. This advanced, versatile, low VOC treatment offers highdurability and bond strength, and the ability to withstand UV, abrasion, chemical spills and heavy traffic. This industrial grade treatment provides rapid curing and attractive, glossy finish for facilities that require maximum protection and little-tono downtime.
Available in 5L, 25L.
MM80
MM-80 is a 100% solids, two component, heavy duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. The industry’s first semi-rigid joint filler and still widely known as the “industry standard” in floor joint protection.
